KartDen

Chassis and Tires

Setup, handling, alignment, widths, weights, and how the tires are working. If the question is grip, balance, stagger, or which tire to put on this weekend, it lives here. Drivers, crew, and parents who only get one set a month are all in the same thread.

15 posts — page 1 of 1

Trying to get a handle on OTK standard upgrades

by rotaxie93 on 2026-10-02 18:50:21

Upvotes: 1 · Downvotes: 0 · Comments: 4

Where do I start with chassis setup?

by Otkfan27 on 2026-09-27 15:34:07

Upvotes: 0 · Downvotes: 0 · Comments: 4

Lesser known chassis, how they stack up to popular ones

by Dylan74yl47 on 2026-09-22 21:48:02

Upvotes: 0 · Downvotes: 0 · Comments: 2

Tire wear diagnosis, what the pattern shows

by Pragazc4m86 on 2026-09-21 16:59:34

Upvotes: 2 · Downvotes: 0 · Comments: 3

Does a tall driver bind and hop in very high grip?

by apexder40 on 2026-09-14 22:29:49

Upvotes: 1 · Downvotes: 0 · Comments: 4

Could the kart hop be my driving style?

by Prag4jes on 2026-09-08 20:58:36

Upvotes: 1 · Downvotes: 0 · Comments: 1

206 Masters chassis at 390 lbs

by karter44ae on 2026-09-06 13:49:38

Upvotes: 3 · Downvotes: 0 · Comments: 4

Bent axle trouble, any advice?

by kosmic52 on 2026-09-05 08:48:35

Upvotes: 0 · Downvotes: 0 · Comments: 1

wear under the chassis, normal or not?

by Logangrid23 on 2026-09-04 11:17:23

Upvotes: 0 · Downvotes: 0 · Comments: 2

Does being bound up ever make the kart feel loose?

by Jeffcr125 on 2026-09-03 20:16:21

Upvotes: 0 · Downvotes: 0 · Comments: 1

Tony Kart STVK 450, two wheeling its way through corners

by tonywrench37 on 2026-09-02 22:45:14

Upvotes: 0 · Downvotes: 0 · Comments: 1

Anything and everything Kart Republic

by Olivialee54 on 2026-08-29 17:36:44

Upvotes: 0 · Downvotes: 0 · Comments: 2

Seat position on a new OTK kart

by chrispate68 on 2026-08-28 22:42:31

Upvotes: 0 · Downvotes: 0 · Comments: 2

How do you free the kart up on corner exit

by Merlinapro101 on 2026-08-26 22:04:26

Upvotes: 1 · Downvotes: 0 · Comments: 3

Kart chassis tube diameter and durability, thoughts?

by slipxfan898 on 2026-08-24 07:01:20

Upvotes: 1 · Downvotes: 0 · Comments: 5