Short clip of the 224 Predator billet rod engine from the three-part build, started and run at full volume. It is noisy, so turn the volume down if needed. This 224 Predator uses the EC Billet rod, Wildcat flat top piston, Banzai 265 camshaft kit, and the Billet SlipStream flywheel. A 26mm Mikuni clone carb and intake were added in Part 3. All part numbers are in the 224 Predator engine build video descriptions. There has been no port work on the stock 224 Predator non-Hemi head, which still has stock-size valves and stock springs. The 26 lb valve springs that came with the Banzai 265 camshaft will go on after more run time. The Predator 224 has a 58mm stroke crankshaft and a DUCAR reinforced block.